Pres-N-Snap Dies
The Pres-N-Snap is a cutting-edge system designed to effortlessly install a diverse range of Snap and Grommet fasteners. With an impressive legacy of over 50 years of innovation, HooVer Products Inc. offers a selection of interchangeable die sets tailored to meet all your upholstery fastener requirements. These essential HooVer tools allow you to easily install the fasteners you need by simply swapping out the Pres-N-Snap dies.
Optimal Performance with Precision Dies
For best performance, HooVer Products recommends using corresponding dies for each brand of fastener, as many brands are configured slightly differently from one another. We also offer a die selection for various setting applications for the following brands.
To ensure optimal performance, we highly recommend using the appropriate Pres-N-Snap tools for each specific brand of fastener. This is crucial, as various brands may have slight configurations that impact installation efficiency. We proudly offer a comprehensive selection of dies for the following brands, ensuring you have exactly what you need for every project.
| Brands | 24L SNAPS | 20L SNAPS | 24L/20L SPRING SNAPS | PRONG SNAPS | GROMMETS | SELF PIERCING GROMMETS |
|---|---|---|---|---|---|---|
| DOT™ | YES | YES | - | YES | - | - |
| FASNAP™ | YES | YES | - | - | - | YES |
| KANE | - | - | YES | - | - | - |
| RAU | YES | YES | - | - | - | - |
| ROME | - | - | YES | - | - | - |
| STIMPSON™ | - | - | - | - | YES | YES |
| SUREFAS™ | YES | - | - | - | - | - |
| YKK™ | - | - | YES | YES | - | - |
HooVer Tools
24 Ligne Snap Dies for use with the Pres-N-Snap
4-Piece Die Set
- The standard 4-piece die set for installing 24 Ligne Snap fasteners
- HooVer Products Part # 14
- The set includes the Button/Cap Die with M2400 Rubber Retainer, Socket Die, Eyelet/Post Die with M2400 Rubber Retainer, and Stud Die
- Compatible with most including:
- Morito Scovill DOT Durable™
- Fasnap Corp.™ 4647
Button/Cap Die
- HooVer Products Part # 10
- Includes the M2400 Rubber Retainer
- Compatible with most including:
- Morito Scovill DOT Durable™ 93-10128, 93-10127, 93-10112
- Fasnap Corp.™ 4647AR
Socket Die
- HooVer Products Part # 13
- Compatible with most including:
- Morito Scovill DOT Durable™ 93-10224, 93-10231
- Fasnap Corp.™ 4647B
Eyelet Die
- HooVer Products Part # 11
- Includes the M2400 Rubber Retainer
- Compatible with most including:
- Morito Scovill DOT Durable™ 93-10412, 93-10413, 93-10414
- Fasnap Corp.™ 4647D, 4647LD, 4647LLD
Stud Die
- HooVer Products Part # 12
- Includes the Stud O-Ring
- Compatible with most including:
- Morito Scovill DOT Durable™ 93-10370
- Fasnap Corp.™ 4647C
Gypsy Stud Die
- HooVer Products Part # D4 (Stamped 22)
- Includes the M2400 Rubber Retainer
- Morito Scovill DOT Durable™ 93-10342
Pull-the-DOT™ Socket Die
- HooVer Products Part # D8 (Stamped PD)
- Compatible with Morito Scovill DOT Pull-the-DOT
Deep Shelf Stud Die (Low Base)
- HooVer Products Part # SHS (Stamped SHS)
- Compatible with Morito Scovill DOT Durable™ 93-10379
Fasnap™ Steel Snap 4650
- HooVer Products Part # FSS (Stamped S Socket)
- Compatible with Fasnap Corp.™ SS4650B, SS4650HB
Fasnap™ Double Stud Die for P232NB
- HooVer Products Part # P2 (Stamped P2)
- Includes the M2700 Rubber Retainer
- Compatible with Fasnap Corp.™ P232NB Series
Surefas Q-Snap™ CAF 316 Die Set
- HooVer Products Part # QDS
- The set includes the Button Die with M2400 Rubber Retainer, S Socket Die, QE Eyelet Die with M2700 Rubber Retainer, and S Stud Die
- Compatible with Surefas Q-Snap™ CAF-316 fasteners
YKK™ SK50 Snap Die Set
- HooVer Products Part # YKK
- The set includes the YB Button Die with M2700 Rubber Retainer, Socket Die, YE Eyelet Die with M2700 Rubber Retainer, and Stud Die
- Compatible with YKK™ SK50 fasteners
20 Ligne Snap Dies for use with the Pres-N-Snap
Baby Durable™ Die Set
- HooVer Products Part # B5
- The set includes the BB Baby Button Die using the M2700 Rubber Retainer, BD Socket Die, EB Eyelet Die using the M2700 Rubber Retainer, and SBD Stud Die using M4706 Rubber Retainer
- Morito Scovill DOT Baby Durable™ Button/Cap: 94-12108, 94-12126, 94-12105 Socket: 94-12205, 94-12206 Stud: 94-12302, 94-12303 Eyelet/Post: 94-12402, 94-12404, 94-12405, 94-12407
Fasnap™ Baby Die Set D7201 and Rome #2 Snap Die Set
- HooVer Products Part # BF
- The set includes the UB Button Die with M2700 Rubber Retainer, BSO Socket Die, EB Eyelet Die with M2700 Rubber Retainer, and BST Stud Die with M4706 Rubber Retainer
- Compatible with:
Fasnap Corp.™ D2701 Baby Series Button/Cap: D7201A, Socket: D7201B, Eyelet/Post: D7201D Stud: D7201C
Rome Fastener Corporation Button/Cap: 2/20, Socket: 21, Eyelet/Post: 21, Stud: 21
YKK™ SK30 Snap Die Set
- HooVer Products Part # SK30
- The set includes the BSB Button/Cap Die with M2700 Rubber Retainer, BD Socket Die, EB Eyelet/Post Die, and BST Stud Die
- Compatible with YKK™ SK30 Snap Series
Grommet Dies and Hole Punches for use with the Pres-N-Snap
Grommet Die Set
#00 Grommet Die Set 3/16” ID
HooVer Products Part # G00
Compatible with most including:
Stimpson Co. Inc.™ Sheet Brass #00 Grommets and Plain Washers
#0 Grommet Die Set 1/4” ID
HooVer Products Part # G0
Compatible with most including:
Stimpson Co. Inc.™ Sheet Brass #0 Grommets and Plain Washers
#1 Grommet Die Set 5/16” ID
HooVer Products Part # G1
Compatible with most including:
Stimpson Co. Inc.™ Sheet Brass #1 Grommets and Plain Washers
#2 Grommet Die Set 3/8” ID
HooVer Products Part # G2
Compatible with most including:
Stimpson Co. Inc.™ Sheet Brass #2 Grommets and Plain Washers
#3 Grommet Die Set 7/16” ID
HooVer Products Part # G3
Compatible with most including:
Stimpson Co. Inc.™ Sheet Brass #3 Grommets and Plain Washers
It is recommended to use a Bench Mount for the Pres-N-Snap when using the #3 Grommet Die Set
#0 Spur Grommet Die Set 5/16” ID
HooVer Products Part # G0S
Compatible with most including:
Stimpson Co. Inc.™ #0 Rolled Rim Grommets and Spur Washers
#1 Spur Grommet Die Set 3/8” ID
HooVer Products Part # G1S
Compatible with most including:
Stimpson Co. Inc.™ #1 Rolled Rim Grommets and Spur Washers
Carr SP4 Self-Piercing Grommet Die Set 3/8” ID
HooVer Products Part # SP4
Compatible with Carr SP4 Self-Piercing Grommets and Plain Washers
Self-Piercing
Fasnap Corp.™ 210 Self-Piercing Grommet Die Set 1/4” Hole (#0)
- HooVer Products Part # 210
- Includes 210R Rubber Retainer
- Fasnap Corp.™ Premium Self-Piercing Grommets and Washers GRMWSH210
Fasnap Corp.™ 230 Self-Piercing Grommet Die Set 5/16” Hole (#1)
HooVer Products Part # 230
Includes 230R Rubber Retainer
Fasnap Corp.™ Premium Self-Piercing Grommets and Washers GRMWSH230
Fasnap Corp.™ 250 Self-Piercing Grommet Die Set 3/8” Hole (#2)
HooVer Products Part # 250
Includes 250R Rubber Retainer
Fasnap Corp.™ Premium Self-Piercing Grommets and Washers GRMWSH250
Stimpson Co. Inc.™ #2 Self-Piercing Grommet #2SPG and Washer #2SPW
Hole Punches
#00 Hole Punch with Anvil 3/16” Hole
HooVer Products Part # H00
#0 Hole Punch with Anvil 1/4” Hole
HooVer Products Part # H0
#1 Hole Punch with Anvil 5/16” Hole
HooVer Products Part # H1
#2 Hole Punch with Anvil 3/8” Hole
HooVer Products Part # H2
#3 Hole Punch with Anvil 7/16” Hole
HooVer Products Part # H3
13MM Hole Punch with Anvil 13MM Hole
HooVer Products Part # H13
Spring, Pearl and Prong, and Specialty Dies for use with the Pres-N-Snap
Disclaimer: Product may vary from photo
Rome #5 24 Ligne Spring Snap Die Set 9/16” 15MM Button/Cap
HooVer Products Part # L8
The set includes the V Button/Cap Die with M2400 Rubber Retainer, DS Socket Die, DE Eyelet/Post Die with M2700 Rubber Retainer, and DT Stud Die
Compatible with Rome Fastener Corporation Button/Cap: 2/24, Socket: 54, Eyelet: 54, Stud: 54
Prym 4GB 20 Ligne Spring Snap Die Set 1/2” 13MM Button/Cap
HooVer Products Part # P4
The set includes the P4C Button/Cap Die with M2700 Rubber Retainer, P4S Socket Die, P4E Eyelet/Post Die, and P4T Stud Die
Compatible with Prym Fashion S-Spring Press Fasteners
Pearl and Prong Snap Dies
DOT Gripper™ Western Pearl 18 Ligne Die Set 7/16” 11.5MM Button/Cap
- HooVer Products Part # L3
- The set includes the 28 Button/Cap Die, 21 Socket Die, 52 Ring Die, 17 Stud Die
- Morito Scovill DOT Gripper™ Fasteners 64-4219 Pearl Prong Button, 64-6914 Socket, 64-3360 Prong Ring, 64-6915 Stud
Specialty Dies
Lift-the-DOT™ Die Set
- HooVer Products Part # D3
- The set includes the 8 Washer Die with 210R Rubber Retainer and 58 Post Die
- Morito Scovill DOT Lift-the-DOT™ Washer 90-16509 and 90-16358 Post
Pull-the-DOT™ Socket Die
HooVer Products Part # D8 (Stamped PD)
Morito Scovill DOT Pull-the-DOT™ 92-18201
Rivet Die Set
Fasnap Corp.™ 10mm Rivet Die Set
- HooVer Products Part # R10
- The set includes the 410 Rivet Die, and WSHR4 Washer Die
- Fasnap Corp.™ SSR4810, SSR41010, SSR41210 Use with R-4 Washer
Turn Lock Die Set
Turn Lock Die Set™
- HooVer Products Part # TLDS
- The set includes the TLA Anvil Die and TLR Rolling Die with set screws and 210R Rubber Retainer
- Compatible with most turn type fasteners including:
Scovill DOT Common Sense 91-78317 Turn Button and 91-78502 Washer - See our Quick Turn Turn Lock and Screwdriver in Other Hand Tools for installing turn type fasteners with a screw stud
(Insert hyperlink to Other Hand Tools page)
- HooVer Products Part # TLDS
- The set includes the TLA Anvil Die and TLR Rolling Die with set screws and 210R Rubber Retainer
- Morito Scovill DOT Common Sense™ 91-78317 Turn Button and 91-78502 Washer
- See our Quick Turn Turn Lock and Screwdriver in Hand Tools & Accessories for installing turn type fasteners with a screw stud
YKK™ SP75 Plastic Snap Die Set
HooVer Products Part # SP75
The set includes the YB75 Button/Cap Die, SP75S Socket Die, and SP75T Stud Die
YKK™ SP75 Series Plastic Snaps
YKK™ SP100 Plastic Snap Die Set
HooVer Products Part # SP100
The set includes the LC3 Button/Cap Die, QY4 Socket Die, and QY5 Stud Die
YKK™ SP100 Series Plastic Snaps
YKK™ Tack Button 27 Ligne Die Set
HooVer Products Part # YKK27
The set includes the KGT Button/Cap Die with 250 R Rubber Retainer and Y15 Tack Die
YKK™ JX10, JX82, JX83, JX85 Button/Cap and TC80 Two Prong Tack
Replacement O-Rings and Rubber Retainers
Small “o” Ring 6227-5
HooVer Products Part # 26
For use with ALL Upper Dies and the Pres-N-Snap Plunger
Stud “O” Ring N012
HooVer Products Part # 30
For use on most 24 Ligne Stud Dies
Gray Ring
M2400 Rubber Retainer
- HooVer Products Part # 2400
- For use with most 24 Ligne Button/Cap and Eyelet/Post Dies
Gray Ring Big
M2700 Rubber Retainer
- HooVer Products Part # 27
- For use with most 24 Ligne and 20 Ligne Button/Cap and Eyelet/Post Dies
M4706 Rubber Retainer
HooVer Products Part # 29
For use with most 20 Ligne Stud Dies
210R Rubber Retainer
HooVer Products Part # 210R
#8 Lift-the-DOT™ Die, QTTL Quick Turn Turn Lock, and Turn Lock Die TLA
230R Rubber Retainer
HooVer Products Part # 230R
For use with 230 Self-Piercing Grommet Dies
250R Rubber Retainer
HooVer Products Part # 250R
Stimpson™ #2 Self-Piercing Grommet Die Set
Why Choose HooVer Products Inc.?
- Exceptional Quality You Can Trust: Crafted with the highest standards of quality, our Pres-N-Snap dies are engineered for durability and reliability. Made from premium materials, these dies provide clean cuts every time, ensuring that your projects turn out perfectly. With HooVer Products Inc., you’re not just purchasing dies; you’re investing in performance and longevity.
- User-Friendly Design for Seamless Integration: Our products’ user-friendly design enables quick installation and removal, making it easy to integrate them into your existing production line. Say goodbye to complicated setups and hello to a more streamlined process.
- Versatility for Every Application: From intricate designs to simple cuts, our Pres-N-Snap dies are versatile enough to handle a wide range of materials. Whether you are working with paper, fabric, or other substrates, they adapt to your needs, giving you the freedom to explore creativity without limitations.
Make your projects stand out with precision and style. Please contact us with any questions or if you need assistance finding compatible Pres-N-Snap tools for your application.